Typical Uses: Resistite Microtopping is used in commercial, institutional and residential applications, including: retail stores and outlets, food and beverage service establishments, restrooms and floors for public areas in hotels, theme parks, museums, schools and universities, etc. Resistite Microtopping may also be used to produce a skid resistant finish.
-Water-retardant.
-Thin-section
-Slip resistant profiles available.
-Abrasion-resistant.
-Low cost.
-Easy to clean.
-Installed only by Professional Factory Trained Dex-O-Tex Contractors.
-Tensile Strength and Elongation ASTM C190 430 psi
-Flammable Properties ASTM E84(Steiner tunnel Test) Flame Spread 4
Smoke Density 0
-Fire Resistance UL-790, Class A Complies
-Salt Spray (Fog) ASTM B117 (1000 hrs. exposure) No visible degradation
-Impact Resistance MIL-D-3134 Complies
-Flexural Strength ASTM C580 195 psi
-Water Vapor Transmission ASTM E96
(Procedure A)
1,958 perms/inch
-Freeze/Thaw ASTM C67 (Method B)
Weight loss after 60 cycles No defects or weight
from 80°F to -50°F
-Resistance to Wind-Driven Rain
Fed. Spec. TT-C-558 (8 hrs.) and TT-P-0035 (24 hrs) at 5" water pressure and 60 gal./hr. water flow, no water or dampness noted on back of test panels.
Downloads
Bookmark This Page
Print This Page
Email This Page