Dexotex

Wall-Glas

It is a three-component epoxy resin and hardener, and woven synthetic fiber reinforcement wallcoating system, which is designed to produce a seamless, dimensionally stable, hard tile-like glazed coating finish. Wall-Glas can be applied over gypsum wallboard, cement and gypsum plasters, concrete, concrete block, masonry, wood, metal and other sound surfaces.

Available Downloads (Please Enable Pop-Ups)

Product Data Sheets

Brochures and Case Histories

Care and Maintenance

Chemical Resistance

MSDS

Additional Files - Dex-O-Tex Contractor Access Only

Advantages:
1.	Seamless surface, provides a continuous membrane.
2.	Easily cleaned and decontaminated.
3.	Superior Chemical Resistance.
4.	Superior dimensional stability because of fiberglass reinforcement.
5.	Does not embrittle with age.
6.	Resists impact chipping and flaking.
7.	Available in a formulation that contains a biocide, which effectively controls growth of algae, bacteria, fungi, mildew, mold and yeast.
8.	Wall-Glas bonds well to any smooth, clean dry and sound substrate, including but not limited to, dry wall, green board, gypsum sheet rock, cement plaster, concrete, plywood, HD particleboard and cement backer board.
9.	Installed only by Professional Factory Trained Dex-O-Tex Contractors.

Technical Information:
1.	Compressive Strength ASTM D695	8,000 psi
2.	Tensile Strength ASTN D638	3,500 psi
3.	Tensile Elongation ASTM D638	8%
4.	Adhesion ASTM D952	Exceeds internal strength of backing.
5.	Hardness ASTM D2240 Shore D	80-85
6.	Water Resistance MIL-D-1044	16 mg
7.	Water Absorption MIL-D-3134 Para 4.7.8	<0.5%
8.	Microbial Resistance ASTM G21	Passes

Return

● *Beautify* ● Protect ● *Waterproof* ● Restore
West Coast ● 310 886-9100	East Coast ● 908 245-2800